FREKOTE SOLO
Harmonization Code : 3215907090 | Ink, whether or not concentrated or solid (excl. printing ink, printer/copier ink cartridges incorporating mechanical or electrical components, and solid ink in engineered shapes for printers/copiers)
Main features
- No-Polish Application
- High-Gloss Mold Finish Retention
- Multiple-Release Performance
Product Description
LOCTITE® FREKOTE® SOLO® is a solvent-based polymer mold release coating designed for gel-coated fiberglass reinforced and filled polyester composites. Applied by spray without polishing, it forms a clear release film that retains mold gloss while supporting multiple releases. The product cures at room temperature and is suitable for use at application temperatures from 13°C to 43°C. Its release coating technology helps minimize mold build-up, simplify mold preparation, and maximize mold utilization in composite manufacturing operations.
Key features
- No-polish application: Spray-on application eliminates polishing requirements and simplifies mold preparation.
- High-gloss mold finish retention: Forms a clear release film that maintains the original gloss of the mold surface.
- Multiple-release performance: Provides a durable release film capable of supporting multiple release cycles while minimizing mold build-up.
Applications / Suitable for
- Gel-coated fiberglass reinforced polyester composites
- Filled polyester composite molding applications
- Composite mold release operations
- Production environments requiring high-gloss mold surfaces
- Molding processes where reduced mold build-up is beneficial
TDS, SDS & Technical Documents
Technical Specifications
General Properties
Other Properties
Additional Information
As-supplied / before-processing properties
Typical physical and application properties for the product as supplied.
| Property | Value | Unit | Method / condition |
|---|---|---|---|
| Appearance | Clear, colorless | — | As supplied |
| Chemical Type | Solvent-based polymer | — | Product description |
| Specific Gravity | 0.72 to 0.735 | — | @ 25°C |
| Application Temperature | 13 to 43 | °C | Recommended application range |
| Density | 0.725 | — | SDS physical properties |
| Flash Point | 6 | °C | Tagliabue closed cup |
